.

.

New
Znse Yüce malzeme çapı 18mm odaklamak mesafe 63.5mm kalınlığı 2mm CO2 lazer odaklamak len

Znse Yüce malzeme çapı 18mm odaklamak mesafe 63.5mm kalınlığı 2mm CO2 lazer odaklamak len

₺ 29.63
₺ 32.21

Ürün figürü
Varlıkta

  Znse Materail Focus Len Diamater 18 mm, Thickness 2 mm Focus Distance 63.5 mm   Zn Se can be made in both hexagonal (wurtzite) and cubic (zincblende) crystal structure.   It is a wide-bandgap semiconductor of the II-VI semiconductor group (since zinc and selenium belong to the 12th and 16th groups of the periodic table, respectively). The material can be doped n-type doping with, for instance, halogen elements. P-type doping is more difficult, but can be achieved by introducing gallium.   Zn Se is used to form II-VI light-emitting diodes and diode lasers. It emits blue light. Zn Se doped with chromium (Zn Se : Cr) has been used as an infrared laser gain medium emitting at about 2.4 µm.   It is used as an infrared optical material with a remarkably wide transmission wavelength range (0.45 µm to 21.5 µm). The refractive index is about 2.67 at 550 nm (green), and about 2.40 at 10.6 µm (LWIR). Similar to zinc sulfide, Zn Se is produced as microcrystalline sheets by synthesis from hydrogen selenide gas and zinc vapour. When free of absorption and inclusions it is ideally suited for CO2 laser optics at 10.6 µm wavelength. It is thus a very important IR material. In daily life, it can be found as the entrance optic in the new range of "in-ear" clinical thermometers, seen as a small yellow window. Zinc selenide can slowly react with atmospheric moisture if poorly polished, but this is not generally a serious problem. Except where optics are used in spectroscopy or at the Brewster angle, antireflection or beamsplitting optical coatings are generally employed.   Zn Se activated with tellurium (Zn Se(Te)) is a scintillator with emission peak at 640 nm, suitable for matching with photodiodes. It is used in x-ray and gamma ray detectors. Zn Se scintillators are significantly different from the Zn S ones.   Zn Se is insoluble in water, but reacts with acids to form toxic hydrogen selenide gas. It can be deposited as a thin film by chemical vapour deposition techniques including MOVPE and vacuum evaporation.

Ürün verisi

Marka Adı:
Svit SensoPlan by Trumsense
Model Numarası:
ZnSe-18-63-C
şekil:
concave-convex
malzeme:
Znse
yapı:
one side concave, one side convex
kullanım:
Focus len
Focal Length:
63.5 mm
Son

Kategorideki diğer ürünler